Machine Status; Admin. Mode - Minolta EP3010 Manual

(10) Machine Status

• This function shows the codes of isolated malfunctions which are currently present. This
screen is also accessible by touching the wrench mark shown at the bottom left corner of
the Basic screen under normal operating conditions.
Touch Panel
Display

Machine Status

Of the malfunction codes listed below, those that have occurred are
displayed, together with the functions that are disabled by these mal-
functions.Up to five isolated malfunctions are shown. When a sixth
isolated malfunction occurs, the copier considers it as an ordinary
malfunction. Even if there are less than five isolated malfunctions, if
there are isolated malfunctions occurring at all paper sources, the
next isolated malfunction will be regarded as an ordinary one.
<Clearing Procedure>
With the Machine Status screen on the Touch Panel, swinging open
and close the Front Door will clear all the isolated malfunctions.

(11) Admin. Mode

• This function is used to enter or change the administrator number, in addition to the func-
tions set in the "Administrator Mode" available from User's Choice.
Touch Panel
Display
Copy Track Mode
Copy Track Data
Maximum Copy
Sets
Non-Auto Shut off
User Help
Administrator # From the 10-Key Pad, enter a 4-digit number (0000 to 9999) that
Input serves as an ID number for opening the "Admin. Mode" of User's
Choice.
[Tech. Rep. Mode
Malfunction Code
C004b
C0350 to 52
C09XX
C0dXX
C0F02
C0F2X
C0F7X
C0FEX to FX
C0b3X / 5X to 7X
[Tech. Rep. Mode
See "Administrator Mode" of User's Choice.
S-38
Machine Status]
Setting
Description
Optical Section Cooling Fan Motor
malfunction
SP communication failure
Paper take-up failure
Duplex Unit malfunction
Orig. Size Det. CPU
Faulty AIDC Sensor
Faulty Paper Empty Sensor
Faulty Original Size Detecting
Sensor
Sorter malfunction

Admin. Mode]

Setting