System Input - Minolta EP3010 Manual

(3) System Input

• This function allows the Tech. Rep. to change the fixed zoom ratios, set the paper size,
define the marketing area, configure for the Key Counter, and input the telephone num-
ber.
Touch Panel Display
Change Fixed Zoom
Ratio
Paper Size Input
Marketing Area
Telephone # Input
[Tech. Rep. Mode Tech. Rep. Choice]
Change a fixed zoom ratio to a desired value in the range between
X0.500 and X2.000.
<Procedure>
1. Select the fixed zoom ratio to be changed and clear the setting
by pressing the Clear key.
NOTE
If a ratio is mistakenly cleared, pressing the Panel Reset key will
recover the ratio.
2. Enter the new zoom ratio from the 10-Key Pad.
3. Touch "Enter" to validate the new setting.
Set the size of the paper used in each paper source.
<Procedure>
1. Select the paper source for which the paper size is to be set
(on the Paper Size Input 1/2 screen).
2. Then, the Paper Size Input 2/2 screen appears. Using the
or key, select the paper size.
3. Touch "Enter" to validate the paper size setting.
Select the marketing area to set the Language and paper size and
fixed zoom ratios.
MJ
NOTE
Be sure to initialize the copier after the marketing area has been
selected.
Input the telephone number that will appear on the Touch Panel
when a malfunction occurs in the copier.
<Procedure>
1. Enter the phone number (consisting of up to 19 digits) from the
10-Key Pad.
2. Touch "OK" to validate the phone number setting.
S-23
Operation
MC MH Other Areas