Paper Take-Up/Transport Sections; Removal Of The Paper Take-Up Unit - Minolta EP3010 Manual

39-4. PAPER TAKE-UP/TRANSPORT SECTIONS

(1) Removal of the Paper Take-Up Unit

1. Remove the Multi Bypass Table.
2. Slide out the 1st and 2nd Drawers.
1149D002AA
3. Remove the Upper Rear, Rear, and Lower Rear
Covers.
4. Remove the 1st and 2nd Drawer Paper Take-Up
Motors (two screws each).
1149D003AA
5. Remove the paper take-up unit lower cover (two
screws).
1149D004AA
6. Unplug the two connectors on the bottom of the
paper take-up unit.
1149D006AA
7. Unplug the print jacks (PJ17A, PJ18A, PJ19A)
from the Master Board.
8. Unplug the print jack (PJ11C) from the Power Sup-
ply Board.
1173D017AA
D-11