Removal Of The Scanner Drive Cable - Minolta EP3010 Manual

(3) Removal of the Scanner Drive Cable

• Remove the Original Cover, Original Scales, and Original Glass.
• Remove the Middle Right, Upper Right, Right, Upper Left, and Upper Rear Covers.
• Remove the Left and Right Hinge Covers, Rear Upper Cover (Small), and Rear Upper
Cover.
6. Temporarily secure the longer length of the Cable
to the Cable Fixing Bracket, ensuring a distance of
5 ± 2 mm for the dimension shown on the left.
1139D124AA
7. Wind the shorter length of the Cable around the
Pulley which is nearer to the Cable Drive Gear.
1139D125AA
8. Hook the spring onto the shorter length of the
Cable and pull it to hook onto the longer length of
the Cable.
9. Check that the dimension noted in step 6 above
measures 5 ± 2 mm. Then, secure the Cable Fix-
ing Bracket.
10. Remove the wrench and peel off the two pieces of
tape.
1139D126AA
1. Align the Scanner with the rectangular hole in the
upper copier frame and remove the screw from the
Scanner Fixing Bracket.
2. Remove the Fixing Bracket.
1139D128AA
D-22