Winding Of The Lens Drive Cable - Minolta EP3010 Manual

(2) Winding of the Lens Drive Cable

1. Hold the Cable Drive Gear in position with its Bead
at the bottom.
1139D119AA
2. Wind the shorter length of the Cable three turns
clockwise around the Cable Drive Gear, working
from the back to the front side. Then tape it.
1139D120AA
3. Wind the longer length of the Cable five turns
counterclockwise around the Cable Drive Gear,
working from the front to back side. Then tape it.
1139D121AA
4. Slide the Cable Drive Gear onto its shaft and insert
a wrench into the hole to position the Cable Drive
Gear.
1139D122AA
5. Pass the longer length of the Cable through the U-
shaped hole in the Light Blocking Plate and wind it
around the Pulley farther away from the Cable
Drive Gear.
1139D123AA
D-21