Imaging Unit; Disassembly, Cleaning, And Replacement Of The Imaging Unit - Minolta EP3010 Manual

39-6. IMAGING UNIT

(1) Disassembly, Cleaning, and Replacement of the Imaging Unit

Changing the Starter
Replacement of the PC Drum
1. Remove the Imaging Unit from the copier.
2. Remove the Imaging Unit Cover (two screws).
NOTE
• When removing the Imaging Unit, do not hold onto
the Main Erase Lamp end (as a deformed PC Drum
Paper Separator Finger results).
1151D044AA
3. Remove the Main Erase Lamp (two screws).
1149D021AA
4. Remove the PC Drum Charge Corona (one screw).
1139D151AA
5. Remove two screws and one Drum Pin to remove
the PC Drum.
NOTE
Whenever the PC Drum has been replaced, be sure to
make the "Adjustments of the Optimum Exposure Set-
ting in the Manual and Auto Mode."
1139D152AA
D-28