Exit/Duplex Switching Unit - Minolta EP3010 Manual

1173SBM2600A
26

EXIT/DUPLEX SWITCHING UNIT

The Exit/Duplex Switching Unit has the following functions:
• Transmits the copier drive to the Sorter/Staple Sorter.
• Locks the Sorter/Staple Sorter in position.
• Selects the paper path, either to the exit or to the Duplex Unit, when the copier is
equipped with a Duplex Unit.
The Master Board outputs a signal to energize the Exit/Duplex Switching Solenoid, which
switches the position of the Exit/Duplex Switching Plate. The Unit has Paper Exit Sensor 2
built into it which detects a sheet of paper being fed out of the Unit. (For more details of
switching control, see the Service Manual for "DUPLEXING UNIT").
Paper Exit Sensor 2 PC30
Paper Exit Roller/Rolls
Exit/Duplex Switching Solenoid SL5
PC30 PWB-A PJ9A-8
SL5 PWB-A PJ9A-10
Control Signal
Control Signal Energized
M-82
Exit/Duplex Switching Plate
Drive Transmitting Gear
(coupled to a gear in the
Exit Section of the copier)
1139M081AA
Exit/Duplex Switching Plate
1139M082AA
Blocked Unblocked
L H
Deenergized WIRING DIAGRAM
L H
WIRING DIAGRAM
2-D
2-D