Minolta EP3010 Manual page 180

16. Snap off one C-clip and remove the Separator Roll
Assy.
1139D107AA
17. Remove three screws and the Solenoid Mounting
Bracket.
1139D108AA
18. Unplug one solenoid connector.
19. Unplug one photosensor connector and remove
the harness from the clamp.
1139D109AA
NOTE
When reinstalling the Solenoid Mounting Bracket,
make sure that the Solenoid is in the deenergized
position.
1139D110AA
20. Snap off the two C-clips to remove the Paper Take-
Up Roll Unit.
1139D111AA
D-18