Minolta EP3010 Manual page 121

Touch Panel
Display
1/25 <100 Accounts>
. The copy track data of the selected page is displayed (Account No.,
. Total Counter, Size Counter, Limit, ID).
. "Count Reset":Clears the total and size counters of all accounts.
22/25 "No."
"Total"
"Size"
"Limit"
"ID #"
1~ <100 Accounts>
. The copy track data of the selected page is displayed.
. "Count Reset" : Clears the total counters of all accounts.
. "Total"
901~
NOTE
The entry of an access number is not possible, 1 to 1000 correspond-
ing to the ID numbers.
Maximum Copy Determine the number of copies or copy sets that can be set using the
Sets 10-Key Pad.
Initial setting:
Disable Auto Select whether to enable or disable the Auto Power-off Mode setting
Shut off available from User's Choice.
<Transmission Procedure>
User Help
: Displayed
1. Using the "
when a from the 10-Key Pad, enter the 3-digit user claim code (up to six
DT-103 is
entries are possible).
mounted. 2. Touch "Data Send" to start the transmission.
[6/6]
Setting (The default is
: Enter the set account number from the 10-Key Pad.
: Displays the count of the Total Counter. (It can also be
cleared with the Clear key.)
: Displays the count of the Size Counter. (It can also be
cleared with the Clear key.)
: Enter the maximum number of copies that can be
made from the 10-Key Pad.
: Enter the access number (0001 to 9999) from the 10-
Key Pad.
: Displays the count of the Total Counter. (It can also
be cleared with the Clear key.)
OFF
NO "OFF" key is not displayed.
"OFF" key is displayed.
YES
or " key, select the user claim number and then,
S-15
Highlighted
.)