Adjustment Of The Atdc Sensor - Minolta EP3010 Manual

(3) Adjustment of the ATDC Sensor

Important
In the following cases, carry out ATDC Adjustment:
• When a new Imaging Unit is used.
• When new Starter is loaded into a Used Imaging Unit.
1. Load the starter.
1139D020AA
2. On the control panel, press the User Mode key,
Meter Count key, Stop key, 10-keys "0", 10-keys
"0", Stop key, 10-keys "0", and 10-keys "1", in that
order, to set the copier into the Tech. Rep. mode.
3. Touch "Function" to open the Function menu.
1149D082CA
4. Touch "Developer." Then, touch "F8 ATDC Adjust."
5. Press the Start Key to let the copier make the
ATDC Sensor adjustment automatically. (It takes
about 5 min. for the copier to complete the adjust-
ment procedure.)
6. After the adjustment has been made, press the
Panel Reset Key twice (or turn OFF the Power
Switch) to return the copier back into the normal
1149D088CA
mode.
D-51