Minolta EP3010 Manual page 24

D The Start Key is pressed.
Start Key ON
ON
Main Drive Motor
ON
Synchronizing Roller Clutch
ON
Paper Transport Clutch
ON
1st/2nd Drawer Paper Take-Up Motor
1st Drawer: Approx. 0.5
2nd Drawer: Approx. 1.1
E Paper is taken up.
1st/2nd Drawer Paper Take-Up Motor ON
ON
Approx.
0.4
1st Drawer:
Approx. 0.9
2nd Drawer:
Approx. 1.5
1
For approx. 0.2 sec. only
ON
ON
ON
ON
ON
ON
Approx.
0.1
1st/2nd Drawer Paper Take-Up Sensor
ON
Approx.
0.3
ON
1st Drawer:
Approx. 0.6
2nd Drawer:
Approx. 1.2
ON
M-6
PC Drive Motor
Main Erase Lamp
Image Erase Lamp
All LEDs are turned ON.
Developing Bias (High Voltage Unit)
Paper Separator Corona (High Voltage Unit)
Cleaning Bias (High Voltage Unit)
Some models have no Bias Seal installed
depending on their marketing areas.
ON
PC Drum Charge Corona/
Image Transfer Corona
(High Voltage Unit)
Vertical Transport Sensor
(2nd Drawer only)
Transport Roller Sensor
ON
Approx.
Paper Leading Edge
0.5
Detecting Sensor
Approx.
0.1
Exposure Lamp
OFF
Paper
Transport
Clutch