Line Ringing Pattern - Avaya IP Office Basic Edition Manual

14.6 Line Ringing Pattern

This option is new for IP Office Basic Edition 6.1 and higher+. It allows the ringing pattern used on a phone to be
determined by the line on which the call has arrived. This feature is not supported on BST phones which only use the
personal ring pattern setting.
206
·
Calls forwarded, sent to call coverage or to a hunt group will always use the line ring pattern.
·
Incoming calls transferred to another station ring with the assigned ring pattern followed by two transfer beeps.
·
Transfer returning outside calls also ring with the two transfer beeps.
·
Since only one audible alert can be heard at a station at one time, the ringing pattern present at that extension
that has multiple lines alerting is for the line that pattern associated with the next alerting line for that extension.
·
The actual ring patterns vary depending on the phone type.
·
Calls direct to an extension will use the line ringing pattern unless the user has
·
Through system web management, ringing patterns can also be assigned for DID routes. These override the
setting of the line.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
·
Alternatively, dial # and the
4. Use the up or down
5. At the Line: prompt, enter the desired line number 01 to 64.
6. The current setting is displayed.
7. Enter the ring pattern number 1 (default) to 8.
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #209. The phone displays Ring Pattern.
4. At the Line: prompt, enter the desired line number 01 to 64.
5. The current setting is displayed.
6. Enter the ring pattern number 1 (default) to 8.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Press the Next Item or Previous Item button for the next or previous line.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Lines. When highlighted, press Select.
system administration
arrow buttons to scroll the display to Ring Pattern. When highlighted, press Select.
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another line.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Override Line Ringing
PHONE button to display the Admin soft key
SPEAKER,
10 code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
active.
208
MUTE and HEADSET
Page 206