Ars Selectors - Avaya IP Office Basic Edition Manual

7.1 ARS Selectors

·
PBX System Mode Only
IP Office Basic Edition systems can be installed in either key or PBX system mode. This feature is only supported
by systems running in PBX system mode. The setting is ignored by systems running in key system mode.
An ARS selector is a group of lines. Calls directed to an ARS selector by the system or by user dialing will seize an
available line in that group. ISDN selectors use all ISDN channels but apply a specific ISDN function to the call, for
example withhold number.
The system routes to an ARS selector based on matching the number dialed by a user to the numbers set for different
classes of call . Users can dial an ARS selector by dialing 8 followed by the ARS selector group number. ARS selectors
120
can also be assigned to buttons using the
The ARS selector groups are numbered in the range 65 to 99. Selectors 65, 66 and 67 are used by default entries.
·
65: Group of Lines
This entry cannot be deleted. By default it contains all analog lines in the system, however it can be edited to
change the lines included.
·
66: ISDN Standard Call
This entry cannot be edited or deleted. Calls routed to this entry will use an available ISDN line with the calling
party information set to match the user's User CLI if set or otherwise blank (to be set by the provider).
·
67: ISDN Number Withheld
This entry cannot be edited or deleted. Calls routed to this entry will use an available ISDN line with the calling
party information set to withheld.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
3. Use the up or down
4. Use the up or down
5. To add a new selector:
a. Use the up or down
b. Enter a two digits number for the selector between 65 and 99. Click on the down
c. At the Type prompt, use the
·
Group of Lines
This type of selector is used to create a group of lines. For a call routed to this selector, an available line
from that group is used. This is the only option available in a system with just analog trunks.
d. If the Type is Group of Lines, click Edit to add lines.
6. To edit an existing selector:
a. Use the up or down
b. Click Edit.
c. Use the up or down
selector.
d. Use Clear to remove all the lines.
e. Use Done when the lines are set as required.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
This process cannot be done using this type of phone.
ETR 18D/ETR 34D Phone
This process cannot be done using this type of phone.
Phone Based Administration
IP Office Basic Edition
77
line assignment
arrow buttons to scroll the display to Admin2. When highlighted, press Select.
arrow buttons to scroll the display to ARS Selectors. When highlighted, press Select.
arrow buttons to scroll through the existing selectors and the option Add.
arrow buttons to scroll to and select Add.
left or right arrow icons to toggle the setting.
arrow buttons to scroll to the existing selector.
arrow buttons to scroll through the available line. Click Add to add a line to the
PHONE. Alternatively use the Back button to move to another menu.
Comments on this document? infodev@avaya.com
.
PHONE button to display the Admin soft key
SPEAKER,
- Issue 6a (Thursday, February 22, 2018)
PBX Mode Call Routing:
MUTE and HEADSET
arrow button.
Page 119