System Default - Avaya IP Office Basic Edition Manual

17.7 System Default

Use this feature to reset the system and return its configuration to the default settings. Reset the system only when
advised to do so by technical support personnel.
!
·
WARNING
This process will restart the phone system and disconnect all currently connected calls.
·
The system reset begins immediately. It takes approximately 5 minutes.
·
This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a
procedure.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Dial #989.
4. When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
5. The system will be immediately restarted.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #989.
4. When the Restart - Default: prompt is displayed, dial 25327 (C L E A R).
5. The system will be immediately restarted.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #989.
4. When the Restart - Defaults: prompt is displayed, dial 25327 (C L E A R).
5. The system will be immediately restarted.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
System Maintenance: System Copy
PHONE button to display the Admin soft key
SPEAKER, MUTE and
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
HEADSET
Page 307