Toll Call Prefix - Avaya IP Office Basic Edition Manual

6.9 Toll Call Prefix

Use this feature to indicate whether users must dial a 0 (for operator assisted calls) or 1 (for direct-dial calls) before the
area code to make a long distance call or just the area code and number.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
press Select.
·
Alternatively, dial # and the
4. Use the up or down
5. The current setting is displayed.
6. Enter 1 or 2.
·
1 = 0 or 1 required before Area Code and Number (the default setting).
·
2 = Area Code and Number Only.
·
Alternatively use the
default setting.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #402. The phone displays Toll Call Prefix.
4. The current system setting is displayed.
5. To change the setting, enter the required value:
·
1 = 0 or 1 required before Area Code and Number (the default setting).
·
2 = Area Code and Number Only.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Restrictions/Permissions. When highlighted,
system administration
arrow buttons to scroll the display to Toll Call Prefix. When highlighted, press Select.
left or right arrow icons to toggle through the settings or Default to return to the
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Dialing Restrictions and Permissions: System Password
PHONE button to display the Admin soft key
SPEAKER,
10 code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 115