Avaya IP Office Basic Edition Manual page 276

ETR 18D/ETR 34D Phone
1. Do one of the following depending on whether you want to change the button programming of the extension you
are using or that of another extension.
To program the same extension
a. At the phone, press Feature 00.
b. Program Extension: is shown on the
display.
2. To select the button, press the corresponding button. For buttons up to 99, you can also dial the button number.
The current setting of that button is displayed.
3. Press the first intercom or call appearance button.
4. Dial the pickup group
5. The button function is changed to Pickup Group followed by the pickup group number.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
To program another extension
a. At either of the first two extensions on the system, press Feature
00 followed by two presses the first intercom or call appearance
button and one press of the second intercom or call appearance
button. Centralized Programming: is shown on the display.
b. At the Extension: prompt enter the number of the extension.
number for the button, 661 to 664.
191
Comments on this document? infodev@avaya.com
- Issue 6a (Thursday, February 22, 2018)
Page 276