Changing The Date - Avaya IP Office Basic Edition Manual

5.1 Changing the Date

The date held by the system and shown on display telephones can be changed. This should only be set on a system not
using Network Time Synchronization
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
Select.
·
Alternatively, dial # and the
4. Use the up or down
5. Enter the new system date in the format MMDDYY using the dial pad. For example 120409 is the date December
4th 2009.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #101. The phone will display System Date.
4. Enter the new system date in the format MMDDYY using the dial pad. For example 120409 would be used to
enter the date December 4th 2009.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #101. The phone will display System Date.
4. Enter the new system date in the format MMDDYY using the dial pad. For example 120409 would be used to
enter the date December 4th 2009.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
.
95
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to System Parameters. When highlighted, press
system administration
arrow buttons to scroll the display to System Date. When highlighted, press Select.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER,
10 code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
Date and Time:
MUTE and HEADSET
Page 93