Contact Closure Operation Type - Avaya IP Office Basic Edition Manual

8.2.2 Contact Closure Operation Type

Each of the two contact closures, when activated, can be activated for 1, 3 or 5 seconds or toggled. For example, if a
contact closure that controls a door lock is set to 5 seconds on, the door lock is released for 5 seconds when a user
activates that contact closure.
If the contact closure is set to toggle, the contact closure must be activated and deactivated by separate user actions. For
example one user can activate the contact closure and another user can deactivate it.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
Select.
·
Alternatively, dial # and the
4. Use the up or down
Select.
5. At the Contact Number: prompt enter 1 or 2 for the contact closure group you want to adjust.
6. The contact's current operation setting is displayed.
7. Press 1 to 4 to change the action of the contact closure.
·
1 = 1 Second on, 2 = 3 Seconds on (the default setting), 3 = 5 Seconds on, 4 = Toggle.
·
Alternatively use the
default setting.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #613. The phone displays Type - Contact Close.
4. Enter the number for contact closure 1 or 2. The display shows the current setting for that contact closure.
5. Enter the value for the action required:
·
1 = 1 Second on, 2 = 3 Seconds on (the default setting), 3 = 5 Seconds on, 4 = Toggle.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #613. The phone displays Type - Contact Close.
4. Enter the number for contact closure 1 or 2. The display shows the current setting for that contact closure.
5. Enter the value for the action required:
·
1 = 1 Second on, 2 = 3 Seconds on (the default setting), 3 = 5 Seconds on, 4 = Toggle.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Auxiliary Equipment. When highlighted, press
system administration
arrow buttons to scroll the display to Type - Contact Close. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER,
10 code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 132