Avaya IP Office Basic Edition Manual page 16

1.3.3 1416
This type of phone can be used for system, centralized and personal administration functions covered by this document.
For system and centralized administration, the phone must be connected to one of the first two extension ports on the
system.
The order of button numbering depends on the mode in which the system is running.
·
For systems running in key system mode, the programmable buttons are numbered from 01 upwards from bottom
to top. The first two buttons are fixed as intercom buttons Intercom 1 and Intercom 2.
·
For systems running in PBX system mode, the programmable buttons are numbered from 01 upwards top to
bottom. The first three buttons are fixed as call appearance buttons.
Additional buttons can be added by the addition of up to 3 DBM32 button modules, each module providing 32
programmable buttons. On the button modules, buttons are numbered from top down or bottom up depending on the
system mode and then left to right.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
- Issue 6a (Thursday, February 22, 2018)
Page 16