Ringing On Transfer - Avaya IP Office Basic Edition Manual

14.8 Ringing on Transfer

Use this feature to specify what callers hear while they are being transferred. If this feature is active, callers hear ringing
while being transferred; if it is not active, callers hear silence while being transferred. Once the call is alerting at the
transfer destination, the caller hears ringing until the call is answered or is sent to the voice messaging system.
·
This feature is only used for held calls, it is not used for parked calls.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
Select.
·
Alternatively, dial # and the
4. Use the up or down
Select.
5. Enter 1 or 2.
·
1 = Active/Assigned (the default).
·
2 = Not active/Not assigned.
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #119. The phone displays Ring on Transfer.
4. Press the appropriate digit to change the value. The default is 1, ie. ringing is used while transferring the call.
·
1 = Active/Assigned (the default).
·
2 = Not active/Not assigned.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #119. The phone displays Ringing on Transfer.
4. Press the appropriate digit to change the value. The default is 1, ie. ringing is used while transferring the call.
·
1 = Active/Assigned (the default).
·
2 = Not active/Not assigned.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to System Parameters. When highlighted, press
system administration
arrow buttons to scroll the display to Ringing on Transfer. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another extension to adjust if required.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Ring Settings: Override Line Ringing
PHONE button to display the Admin soft key
SPEAKER,
code.
10
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 209