Avaya IP Office Basic Edition Manual page 149

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. Do one of the following:
To program the same extension
a. Press Feature and dial *1 or
*2 or *3.
·
If the system has a system
password set, it is requested.
Enter the password.
2. Press the first intercom or call appearance button.
3. Enter the extension name.
·
Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
1 1!"$%&'()+,-./
4
7 7pqrsPQRS
* *:;<=>?@[\]^_`
·
Do not use punctuation characters such as #, ?, /, -, _ and , in the name. Start the name with an
alphabetic character. Note that the name is case sensitive and must be unique. Non-English languages do
not offer accented characters.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
ETR 18D/ETR 34D Phone
1. Do one of the following:
To program the same extension
a. At the phone, press Feature 00.
b. Program Extension: is shown on the
display.
2. Press the first intercom or call appearance button.
3. Enter the extension name.
·
Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
1 1!"$%&'()+,-./
4
7 7pqrsPQRS
* *:;<=>?@[\]^_`
·
Do not use punctuation characters such as #, ?, /, -, _ and , in the name. Start the name with an
alphabetic character. Note that the name is case sensitive and must be unique. Non-English languages do
not offer accented characters.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
To program another extension
a. At either of the first two extensions on the system, press
**user (ie. Feature **8737).
·
If the system has a
password.
b. At the Extension: prompt enter the extension number of the extension you
want to program.
2
4ghiGHI 5
8
0
To program another extension
a. At either of the first two extensions on the system, press Feature
b. At the Extension: prompt enter the number of the extension.
2
4ghiGHI 5
8
0
Comments on this document? infodev@avaya.com
system password
2abcABC
5jklJKL
8tuvTUV
0 Space
00 followed by two presses the first intercom or call appearance
button and one press of the second intercom or call appearance
button. Centralized Programming: is shown on the display.
2abcABC
5jklJKL
8tuvTUV
0 Space
Extension Settings: Extension Name
Feature
set, it is requested. Enter the
114
3 3defDEF
6 6mnoMNO
9 9wxyzWXYZ
# #
3 3defDEF
6 6mnoMNO
9 9wxyzWXYZ
# #
- Issue 6a (Thursday, February 22, 2018)
Page 149