Voicemail Password - Avaya IP Office Basic Edition Manual

Hide thumbs Also See for IP Office Basic Edition:
Table of Contents

Advertisement

12.3 Voicemail Password

Extension users can set an access code for their mailbox. When they do this, the access code is request when they access
the mailbox. If the user forgets their password you can use system administration to remove it.
·
This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a
procedure.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the
up or down
Select.
3. Dial #325. The display shows Reset Voice Mail Pwd.
4. At the Extension: prompt enter the two-digit number of the extension.
5. Press Proceed.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #325. The display shows Reset VM Pwd.
4. At the Extension: prompt enter the two-digit number of the extension.
5. Press Enter.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #325. The display shows Reset Voice Mail Pwd.
4. At the Extension: prompt enter the two-digit number of the extension.
5. Press Enter.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
PHONE. Alternatively use the Back button to move to another menu.
system password
set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Voicemail: VMS Coverage Rings
PHONE button to display the Admin soft key
SPEAKER,
MUTE and
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
HEADSET
Page 177

Advertisement

Table of Contents
loading

Table of Contents