Avaya IP Office Basic Edition Manual page 100

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #407. The phone displays Allowed Lists.
4. At the List Number prompt, enter a list number 1 to 8.
5. At the Entry prompt, select a list entry 01 to 10.
6. Enter the first telephone number. To save the telephone number in memory, press Enter. Do one of the
following:
·
To delete the telephone number you just entered, press Remove.
·
To add other telephone numbers to this list, press Next Item and repeat Steps 6 and 7.
·
To create another list, press Next Procedure + Prev Procedure and go to Step 5.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #407. The phone displays Allowed Lists.
4. At the List Number prompt, enter a list number 1 to 8.
5. At the Entry prompt, select a list entry 01 to 10.
6. Enter the first telephone number. To save the telephone number in memory, press Enter. Do one of the
following:
·
To delete the telephone number you just entered, press Remove.
·
To add other telephone numbers to this list, press Next Item and repeat Steps 6 and 7.
·
To create another list, press Next Procedure + Prev Procedure and go to Step 5.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
Page 100