Vms Hunt Schedule - Avaya IP Office Basic Edition Manual

14.11 VMS Hunt Schedule

Use this feature to determine whether the outside lines go to the voicemail auto attendant all the time, only during day
operation, only during night operation or never. You can program VMS Hunt Schedule on a per-line basis.
When a line is set to go to the VMS auto attendant, the
before going to the auto attendant.
·
If you set the VMS Hunt Schedule for day only or night only, you must program a
first extension in the system.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
4. Use the up or down
Select.
5. At the Line: prompt enter the line number, for example 01 for line 1.
6. Enter the required value 1 to 4. The default is 4, ie. no voicemail coverage.
·
1 = Always, 2 = Day only, 3 = Night only, 4 = Never (Default).
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #507. The phone displays VMS Hunt Schedule.
4. Enter the line number.
5. The current setting is shown in the telephone display.
6. Enter the required value:
·
1 = Always, 2 = Day only, 3 = Night only, 4 = Never (Default).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Press the Next Item or Previous Item button for the next or previous line.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
VMS Hunt Delay
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Groups. When highlighted, press Select.
arrow buttons to scroll the display to VMS Hunt Schedule. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another line.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
Ring Settings: Transfer Return Extension
settings determines how long the call rings
178
Night Service button
PHONE button to display the Admin soft key
SPEAKER, MUTE and
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
for the
189
HEADSET
Page 215