Avaya IP Office Basic Edition Manual page 81

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #210. The phone displays Assign Line to AA.
4. At the Line: prompt, enter the desired line number 01 to 64.
5. The current setting is displayed.
6. Enter the auto attendant number 1 to 9. The default is no auto attendant.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Use the Next item or Previous item buttons to select another line to adjust if required.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
Line Settings: Assign Line to Auto Attendant
- Issue 6a (Thursday, February 22, 2018)
Page 81