Avaya IP Office Basic Edition Manual page 184

2. System Administration: is shown on the display.
3. Dial #502. The phone displays Calling Group.
4. At the Group: prompt, enter a group number.
5. At the Extension: prompt, enter the number of the extension to be programmed.
6. Enter 1 or 2. The default is 2 (Not Assigned), ie. the extension is not a member of the group.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Do one of the following:
·
To assign or unassign another extension, press Next Item or Prev Item until the extension number appears
on the display. Then repeat Step 6.
·
To program another group, press
number. Then repeat Steps 5 and 6.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Next Procedure
Comments on this document? infodev@avaya.com
22 22
+ Prev Procedure
- Issue 6a (Thursday, February 22, 2018)
and enter a new group
Page 184