System Mode - Avaya IP Office Basic Edition Manual

3.1 System Mode

The system can operate in either
The default mode that the system adopts depends on the type of System SD card fitted to the system. Systems with a
PARTNER, Norstar or IP Office U-Law card default to key system mode. Systems with an IP Office A-Law card default to
PBX system mode.
Key Mode vs PBX Mode - Quick Summary
Key Mode
·
The first 2 programmable buttons are used as
intercom buttons.
·
Internal calls are made and answered using the
intercom buttons.
·
External calls are made and answered using line
appearance buttons.
·
The line used for outgoing external calls is
determined by the line button pressed.
·
Automatic line selection defaults to the analog lines
present and then the 2 intercom buttons.
!
·
WARNING
Changing the system mode will also default most settings, including all button programming.
!
·
WARNING
This process will restart the phone system and disconnect all currently connected calls.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
3. Use the up or down
4. Use the left or right
5. Click Save.
6. The menu will prompt Immediate Reboot ? Select either Confirm or Cancel.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
This process cannot be done using this type of phone.
ETR 18D/ETR 34D Phone
This process cannot be done using this type of phone.
Phone Based Administration
IP Office Basic Edition
key system mode or PBX system mode
arrow buttons to scroll the display to Admin2. When highlighted, press Select.
arrow buttons to scroll the display to System Mode. When highlighted, press Select.
arrow icons to toggle the setting between Key or PBX.
PHONE. Alternatively use the Back button to move to another menu.
Comments on this document? infodev@avaya.com
56 .
PBX Mode
·
The first 3 programmable buttons (2 on ETR phones)
are used as call appearance buttons.
·
Internal calls are made and answered using the call
appearance buttons.
·
External calls are made and answered using the call
appearance buttons.
·
The line used for outgoing external calls is
determined from the number dialed.
·
Automatic line selection defaults to the 3 call
appearance buttons (2 on ETR phones).
PHONE button to display the Admin soft key
SPEAKER,
- Issue 6a (Thursday, February 22, 2018)
System Changes:
MUTE and HEADSET
Page 67