Avaya IP Office Basic Edition Manual page 299

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #730.
4. If a system password
system password.
5. The current remote administration password is displayed or dashes if no password has been set. Enter or change
the password.
·
Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
1 1!"$%&'()+,-./
4
7 7pqrsPQRS
* *:;<=>?@[\]^_`
·
Do not use punctuation characters such as #, ?, /, -, _ and , in the password. Note that the password is case
sensitive and must be unique.
2. To save the password, press
entered.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
has been set, the prompt Enter Sys Password: is displayed. Enter the four digit
114
2
4ghiGHI 5
8
0
Enter . The bottom line of the display shows the password as it has been
22
Comments on this document? infodev@avaya.com
System Maintenance: Remote Administration Password
2abcABC 3
5jklJKL 6
8tuvTUV 9
0 Space #
- Issue 6a (Thursday, February 22, 2018)
3defDEF
6mnoMNO
9wxyzWXYZ
#
Page 299