Contact Closure Group - Avaya IP Office Basic Edition Manual

8.2.1 Contact Closure Group

Before a user can activate a contact closure, you must assign the user's extension to the contact closure group for that
contact closure.
·
If a contact closure is used to control a door lock and a doorphone is also installed at that door, you may also want
to assign the extensions in the contact closure group to also be the
doorphone.
·
Users in the group can active the contact closure using a
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Use the up or down
Select.
·
Alternatively, dial # and the
4. Use the up or down
Select.
5. At the Group: prompt, enter 1 or 2 for the contact closure group you want to adjust.
6. At the Extension: prompt enter the extension number whose group membership you want to change. The
extension's current group membership is shown.
7. Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
·
Alternatively use the
default setting.
8. Use the up or down
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #612. The phone displays Contact Close Grp.
4. Enter the number for the contact closure 1 or 2.
5. At the Extension: prompt, enter the extension that you want to assign to the contact closure group.
6. Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #612. The phone displays Contact Close Grp.
4. Enter the number for the contact closure 1 or 2.
5. At the Extension: prompt, enter the extension that you want to assign to the contact closure group.
6. Press 1 (Assigned) or 2 (Not assigned) to change the extension's membership. The default is 2 (Not assigned).
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
arrow buttons to scroll the display to Auxiliary Equipment. When highlighted, press
system administration
arrow buttons to scroll the display to Contact Close Grp. When highlighted, press
left or right arrow icons to toggle through the settings or Default to return to the
arrow buttons to select another extension to adjust if required.
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
doorphone alert extensions
Contact Closure button.
254
PHONE button to display the Admin soft key
SPEAKER,
10 code.
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
for that
127
MUTE and HEADSET
Page 130