Avaya IP Office Basic Edition Manual page 161

ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #304. The phone displays Automatic Ext Privacy.
4. At the Extension: prompt enter the two-digit number of the extension.
5. Press either 1 (assigned) or 2 (not assigned). The default is 2 (not assigned).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
Phone Based Administration
IP Office Basic Edition
Comments on this document? infodev@avaya.com
Extension Settings: Automatic Privacy
- Issue 6a (Thursday, February 22, 2018)
Page 161