External Dialing Prefix - Avaya IP Office Basic Edition Manual

7.3 External Dialing Prefix

·
PBX System Mode Only
IP Office Basic Edition systems can be installed in either key or PBX system mode. This feature is only supported
by systems running in PBX system mode. The setting is ignored by systems running in key system mode.
This option sets the digit which, when dialed as the first digit, indicates that the call is intended to be external and should
be routed by comparing the remaining dialed digits against the
The default setting depends on the
United States. 0 is the default setting for systems with the Locale setting Germany. All other locales default to no
external dialing prefix.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
3. Use the up or down
4. Use the left or right
5. Click Save.
6. The menu will prompt Immediate Reboot ? Select either Confirm or Cancel.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
This process cannot be done using this type of phone.
ETR 18D/ETR 34D Phone
This process cannot be done using this type of phone.
Phone Based Administration
IP Office Basic Edition
system locale 69 . 9 is the default setting for systems with the Locale setting of
arrow buttons to scroll the display to Admin2. When highlighted, press Select.
arrow buttons to scroll the display to OG Call Select.
arrow icons to change the setting between None, 9 and 0.
PHONE. Alternatively use the Back button to move to another menu.
Comments on this document? infodev@avaya.com
PBX Mode Call Routing: Call Classes
call out settings .
120
PHONE button to display the Admin soft key
SPEAKER,
- Issue 6a (Thursday, February 22, 2018)
MUTE and HEADSET
Page 121