System Reset - Avaya IP Office Basic Edition Manual

17.8 System Reset

Use this feature to reset the system while retaining the currently programmed settings. Reset the system only when
advised to do so by technical support personnel.
!
·
WARNING
This process will restart the phone system and disconnect all currently connected calls.
·
The system reset begins immediately. It takes approximately 5 minutes.
·
This procedure is not listed when using the Next Procedure or Previous Procedure buttons to select a
procedure.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
Select.
3. Dial #728.
4. At the Reset - Save All prompt press Proceed.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press
·
If the system has a
2. The phone displays System Admin.
3. Dial #728.
4. At the Reset - Save prompt press Enter.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #728.
4. At the Reset - Save All prompt press
Phone Based Administration
IP Office Basic Edition
arrow buttons to scroll the display to System Administration. When highlighted, press
system password set, it is requested. Enter the password.
114
Enter .
22
Comments on this document? infodev@avaya.com
PHONE button to display the Admin soft key
SPEAKER, MUTE and
Feature **config (ie. Feature **266344).
- Issue 6a (Thursday, February 22, 2018)
HEADSET
Page 308