Automatic Line Selection - Avaya IP Office Basic Edition Manual

4.7 Automatic Line Selection

When an extension goes off hook without pre-selecting a button, automatic line selection is used to determine which
intercom, call appearance or line button is seized. By default each extensions' automatic line selection list contains line
buttons in sequence from line 1 up to the
For systems running in key system mode, the number of line buttons assigned to each extension and therefore useable
for automatic line selection will depend on the
Assignment 77 programming.
·
For an extension assigned as a
intercom or call appearance buttons first.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the
option. If you access phone administration during a call, only the
buttons still affect the connected call.
2. Use the up or down
press Select.
3. At the Extension: prompt enter the extension that you want to configure.
4. Use the up or down
Select.
5. Enter a two digit button number to indicate the line, intercom or call appearance button that you want added to
the extension user's automatic line selection list.
6. Repeat the process in steps 5 to add further buttons to the list.
·
Exit programming by pressing
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At a system administration extension (the first two extensions on the system); press
Feature **8737).
·
If the system has a
2. At the Extension: prompt enter the extension number of the extension you want to program.
3. Dial **.
4. Press the appearance buttons in the order required.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
Phone Based Administration
IP Office Basic Edition
Number of Lines
Number of Lines
doorphone extension
arrow buttons to scroll the display to Centralized Programming. When highlighted,
arrow buttons to scroll the display to Auto Line Selection. When highlighted, press
PHONE. Alternatively use the Back button to move to another menu.
system password set, it is requested. Enter the password.
114
Comments on this document? infodev@avaya.com
75 setting plus the intercom or call appearance buttons.
75
settings and any additional lines assigned using
, automatic line selection is automatically set to select
125
PHONE button to display the Admin soft key
SPEAKER,
- Issue 6a (Thursday, February 22, 2018)
Line
MUTE and HEADSET
Feature **user (ie.
Page 86