The Registration status indicates the status of the handset in the SIP DECT system. The
status is Registered or Absent.
- If the Registration status is Registered, the handset is registered in the SIP DECT
system and can make calls.
- If the Registration status is Absent, the handset is not registered in the SIP DECT
system and cannot be used to make calls.
• Handset Type and SW Version
This shows the type or model of the handset subscribed to the system and the version of
software installed on the handset.
Important:
The system loses the information about handset types and software versions
subscribed on a DAP when the DAP restarts. To restore this information, turn off and
on the handsets subscribed to the restarted DAP or restart all DAPs using option
Reboot all in DAP Manager. For information, see
DAP management
Manage DECT Access Points (DAP).
Changing a DAP Radio Part Number
Follow this procedure to change the unique Radio Part Number (RPN) of a DECT Access Point
(DAP) and manually configure radio synchronization. Each DAP attempts to synchronize to
the DAP with the lowest RPN.
Changing an RPN
1. Open Internet Explorer and enter the following URL in the address field: localhost/
2. Click Access points .
SIP DECT Fundamentals
cds.
The DAP manager IP DECT page appears.
The DECT Access Points page appears.
DAP management
Restart all DAPs
on page 131.
October 2012
129