Table of Contents
Advertisement
Note:
Using the Location Builder in the DAP Controller Release 5.0 and lower, you can create
maps of the location and import these maps as xml files in the Sync Analyser. In the
DAP Controller Release 5.2, the Location Builder has been changed completely and
is a tool for third line engineers. It is no longer a tool to be used in the field.
After loading the file, it opens the Location window, see Section Synchronization Analyzer
Location page.
Find: Allows you to search for an RPN based on entering the RPN number, the MAC
address or Info Field.
Settings: This opens the Settings window. In this window you can set the threshold for
RSSI value and the Threshold for the Phase Difference, in which you can enter the RSSI
threshold and the Phase Difference threshold. This threshold is used to indicate an alarm
condition (displayed in the Visibility information pane in "red". ). In general the default
settings are OK. The Tresholds "max. number of daps seen" and the threshold "min.
number of daps seen" are applicable for the Location viewer. In the Location Viewer, you
can select "Show DAPs seeing the max. nr. of other DAPs" and also "Show DAPs seeing
the min. nr. of other DAPs".
• Tools
Track Portable: Asks for opening the traffic bearer file. After that it opens the Portable
Tracking window. For more information see Section Synchronization Analyzer Portable
Tracking page.
• Help
Synchronization Analyzer Location page
The Location Window shows you a three dimensional view of the location of the DAPs. There
are five types of view:
• Synchronization structure (tree view) This option shows you the synchronization structure in
the site/building.
Red = Root level
Green = First level
Yellow = Second level
Light blue = Third level
SIP DECT Fundamentals
System synchronization analysis
October 2012
159
Advertisement
Table of Contents
