Table of Contents
Advertisement
Software requirements
6. Define a range of IP addresses for the DAPs used; for example, 192.168.100.200
7. Define the associated subnet mask; for example, 255.255.255.0.
8. Click Next.
9. Enter the Start IP address and End IP address values to exclude; for example,
10. If you entered IP address ranges in step 6, click Add to save the exclusion list.
11. Click Next
12. Set the desired lease duration of the granted IP addresses to the desired value.
13. Click Next
80
SIP DECT Fundamentals
to 210.
The New Scope Wizard—Exclusion of an IP address range window appears.
the IP addresses of DHCP server and the TFTP server.
This is necessary only if the IP address or addresses of equipment with a fixed IP
address is within the DHCP address range. If it is not within the DHCP address
range, leave this field blank.
The Lease Duration window appears.
The New Scope Wizard—Configure DHCP options window appears.
Comments? infodev@avaya.com
October 2012
Advertisement
Table of Contents
