Avaya CS 1000 Fundamentals page 176

G.729 daughterboard and DAP wall mounting
4. Remove the protection foil from the sticky part on the G.729 Daughter Board.
5. Mount the G.729 Daughter Board onto the main PWB. Push the Daughter Board
176 SIP DECT Fundamentals
Figure 38: Light conductor for LEDs
Now the 4720 DAP Printed Wiring Board (PWB) and the G.729 Daughter Board are
separate items.
Figure 39: G.729 Daughter Board with sticky foam
carefully onto the main board. The white connector should fit well. Ensure the
adhesive portion sticks to the Main Board.
Comments? infodev@avaya.com
October 2012