Table of Contents
Advertisement
5. Enter the RPN of the required installed DAP.
6. Click OK.
Disable a subscription
Follow this procedure to disable a subscription.
When you disable a subscription, the system attempts to remove the subscription data from
the handset. If the subscription data is removed successfully, the DN is available for use by
another handset, and you can register the handset again.
The handset cannot make and receive calls while the subscription is disabled.
Disabling a subscription
1. Open Internet Explorer and enter the following URL in the address field:
2. Select Subscriptions.
3. Select the DN to delete.
4. Click Disable.
Removing a subscription
Follow this procedure to remove subscription data from the system only. This procedure does
not clear the subscription from the handset.
Important:
Avaya recommends that you use the following procedure only if a handset was lost or
damaged beyond repair.
Removing a subscription from the system
1. Open Internet Explorer and enter the following URL in the address field:
SIP DECT Fundamentals
The maximum number of subscription records for every DAP is 25.
localhost/cds.
TheDAP manager IP DECT page appears.
The Subscriptions page appears.
If the DN you plan to disable is not visible, go to subsequent pages until you find it.
The page number appears in the top and bottom rows of the subscriptions table.
The status of the configuring subscription record changes from Subscribed to Black
Listed. When the SIP DECT system manages to delete the subscription record from
the handset, the status changes to Free.
Subscription management
October 2012
125
Advertisement
Table of Contents
