Table of Contents
Advertisement
Install the external housing
8. Keep the cabinet in the correct position against the wall and mark the mounting
9. Drill the holes in the wall using an appropriate drill that is applicable for the wall.
10. Mount the cabinet to the wall. Use appropriate screws and plugs.
11. Push the special nuts that came with the cabinet into the corner holes of the
12. Lead the cable via the swivel into the cabinet.
224
SIP DECT Fundamentals
holes in the corners of the cabinet on the wall. If necessary use the template that
was delivered with the cabinet.
Figure 75: Marking the corner holes on the wall
Figure 76: Mounting the cabinet to the wall
cabinet.
Figure 77: Pushing the special nuts in place in the corners of the cabinet
Comments? infodev@avaya.com
October 2012
Advertisement
Table of Contents
