Table of Contents
Advertisement
System synchronization analysis
"X" sign Red = This DAP does not exist in the file that you have loaded for comparison.
Print: Sends the Tree view to a printer.
Exit: Exits the program.
• View
Problems: This selects the problem view, which is the default. A number of potential
problems, like DAPs that can synchronize to one other DAP only, are made visible with
this view type. Below you see a Problem screen where some (potential) problems are
visible.
The little triangles indicate a problem or a potential problem. When you click the triangle,
you see information in the DAP Information pane in the right bottom corner. In this
example, you see a potential problem (not yet a real problem) that the DAP has only one
DAP at a higher layer.
SIP DECT Fundamentals
October 2012
157
Advertisement
Table of Contents
