Table of Contents
Advertisement
In
Figure 19: Cell contour of the closest adjacent critical point to the initial critical
point
Figure 19: Cell contour of the closest adjacent critical point to the initial critical point
Use the following procedure to locate the cell center.
Locating the cell center
1. Place the deployment tool at one critical point and then use the deployment handset
2. Repeat step 1 at an adjacent critical point. The call center is where the cell
3. Use the cell contours to locate a cell center.
SIP DECT Fundamentals
on page 49, P2 is the closest adjacent critical point to the first critical point.
to obtain a change in audio quality. The audio quality change determines the cell
boundary contour.
boundaries of both critical points meet. Mark the cell center position on a floor
plan.
Locate the cell center where the cell contours meet. Choose a position on the floor
plan that meets the following requirements:
• is farthest from the critical points
• provides good audio quality at the critical point,
• complies with the requirements described in section
requirements
on page 19
• is in the coverage area
Label the cell center on the floor plan with the following symbol. xCn, where x = the
floor and n = is the cell number in sequence of the entire plan.
System deployment
Deployment
October 2012
49
Advertisement
Table of Contents
