Avaya CS 1000 Fundamentals page 248

DECT Handset Configurator Tool
4. Click Browse for Input fields and navigate to the prepared .csv, .xls, or .tfb file.
5. Click Browse for Output file, enter a name for subscription file you are creating,
6. Click OK.
In the folder you selected for the Output file, you will find the subscription file you created. Use
this file for writing batch (refer to Operations with a MEM card for details) or adding a
subscription to the handset (see
information).
Importing a subscription to the image
To import a subscription to the image, perform the following steps:
1. Prepare a subscription file (see
2. Select Connectivity in the Settings Contacts menu on the left.
3. Click Browse for subscription file and navigate to the folder with the prepared
4. Select the prepared subscription file and click OK.
5. Click Add in the subscription list.
6. Enter the DECT system name and select DNR (if a few subscriptions are available
7. Click OK.
8. Select default DECT system (subscription) using the radio button on the left, or
9. Save the image file and write a card if required.
Note:
You can add up to four subscriptions to the image using the DECT Handset Сonfigurator. If
there were subscriptions on the handset before a MEM card is inserted, they are not enabled
until the MEM card is removed from the handset. You can have up to eight subscriptions on
the handset only if you already have four subscriptions on the MEM card that was in the
handset and then you add new subscriptions.
248 SIP DECT Fundamentals
and navigate to the folder where it will be saved.
subscription file
in the prepared subscription file).
select the Auto select option.
Comments? infodev@avaya.com
Subscription export and import
Handset subscription
on page 134 for more
on page 247 for details).
October 2012