7. Click Save System and deactivate the system.
8. Ensure that DHCP and TFTP servers are configured properly, so that DAPs can
9. Activate the system and restart all DAPs.
10. Start DAP Manager, open Access Points page and ensure that all DAPs are present
Routed Head Quarter Configuration with Branch Office
Routed Head Quarter Configuration with Branch Office makes it possible to create Routed
Head Quarter configuration in one of the branch offices. Within the Branch Office with Routed
Head Quarte,r DAPs belong to various subnets and behave as a single site of one SIP DECT
system with the full support of seamless handover. As for the whole SIP DECT system, each
Branch Office (including the Branch Office with Routed Head Quarter) behaves as an isolated
site of that SIP DECT system. Branch Office configuration supports seamless handover within
SIP DECT Fundamentals
If you were referred to this procedure from
page 96, click Apply, and continue configuring the SIP DECT system using
Configuring SIP Settings
OR
Go to step 7.
start in all subnets.
and working.
Configuring System Settings
on page 96.
Routed Head Quarter configuration
October 2012
on
111