Table of Contents
Advertisement
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line Gateway
2. Select the required available extension number or numbers.
3. Click Enable.
4. Find System configuration in the DECT handset menu.
5. Choose New, and enter the displayed PIN code.
6. Enter the name and DN of the SIP-DECT system.
SIP DECT Fundamentals
If the required number is not visible, select another page. The page number appears
in the top and bottom rows of the subscriptions table.
Important:
If you plan to create a multiple-site configuration, use the option Enable for Multi-
Site instead of Enable.
The status of the subscription record changes from Free to Enabled and the
Personal Identification Number (PIN) appears. The DAP manager generates a PIN
when it performs each subscribe operation; the PIN appears only when the
subscription status is Enabled.
You can disable or remove subscriptions. For information about subscription
management, see
Subscription management
A DECT handset is required for the remainder of this procedure.
Sometimes you must enter PARK code first. The PARK code appears on the left at
the bottom of the Subscriptions page.
You must enter the PIN within 16 minutes, otherwise the subscription mode
terminates for that specific extension number, and you must restart the subscription
process from the beginning.
on page 123.
October 2012
105
Advertisement
Table of Contents
