Avaya CS 1000 Fundamentals page 194

Location builder tool
2. Click Create Area to initialize the Location. The Create Area dialog box appears.
3. In the Size fields, enter values large enough to encompass all the buildings in your
4. Click Building to add a building to the Location.
194 SIP DECT Fundamentals
location.
The size values used in the location builder do not correspond to real-world units,
such as meters or feet. However, Avaya recommends that you consistently enter
values that equal the measurements in meters to make your location map easy to
understand.
Comments? infodev@avaya.com
October 2012