Table of Contents
Advertisement
4. Click OK, and then Save in the File Download Page.
5. Enter the name of the file with exported subscriptions, navigate to the folder in which
Importing subscriptions on remote systems
1. Open localhost/cds in your Internet Browser (on DAP controller PC).
2. In the navigation menu, click Pack Up & Go.
3. Click Import.
4. Choose the appropriate file in the folder that stores files with subscriptions
5. Click OK.
Configuring Universal Extension on remote sites
Universal Extension (UEXT) redirects incoming calls to the DAP. Key 0 corresponds with the
DN, configured on the DAP. Key 1 HOT U is the same number with a User agent DN prefix
configured for SIP Line.
Use LD 11 to configure UEXT.
Packages 139, 415, and 417 must be enabled on the Call Server.
Package 370 and DECT Visitor licenses are required for adding DECT visitors in MSMN
configuration.
Table 18: LD 11: Add universal extension
Prompt
REQ
TYPE
CUST
TN
UXTY
DES
SIPU
NDID
SCPW
VSIT
SIP DECT Fundamentals
to store the file, and click Save.
The DAP manager IP DECT page appears.
Response
NEW
UEXT
n
ls c u, for
example, 96 0 1 0
SIPL
aaaa
xxxx
xxxx
xxxx
yes
Multiple-site mobility network configuration
Description
Add new extension
Universal Extension
n = customer number
where l= virtual superloop, s = shelf,
c = card, u = unit
UEXT subtype
Designator. Optionally, enter a description.
SIP DECT user DN
SIP Line Node ID of the current section
password configured in DAP Controller on the current
system
(Configuring SIP Settings
Vistor - enable MSMN support for SIP DECT user
on page 96).
October 2012
115
Advertisement
Table of Contents
