Table of Contents
Advertisement
System configuration
4. Click Apply.
5. Click Save.
Configuring other settings—PBX Settings
The following procedure applies to SIPL configurations only.
1. In the Settings pane, click PBX Settings and select Three party conference
2. In Conference ID field, enter conference.
3. In the Conference IP address field, enter the SIP Line Gateway Node IP
4. Click Apply.
Configuring other settings—Performance/Email Settings
1. Click Performance/Email Setting.
2. In Performance Settings, under Performance Counters Configuration, enter a
3. Enter a value in Interval EPM generation every _____ minutes or accept the
4. Enter a value next to Start measurement a with the time you want performance
5. Enter a value next to Stop measurement at with the time you want performance
6. Under Create performance counters every, select the check boxes under the
7. In the field Keep Performance data for _____ days fill in the number of days you
100
SIP DECT Fundamentals
package. For more information, see
mounting
on page 175
• The G.729 codec is primarily intended for inter-DAP voice transmission. The
DAP determines if calls between SIP DECT handsets and IP-based
endpoints use G.711 or G.729, regardless of zone configuration (Best
Bandwidth or Best Quality) on CS 1000.
• The options preferred use of G.729 and only use of G.729 in DAP
Controller are not supported.
Settings tab,
address.
The Performance/Email Settings window with the PCR Settings tab selected
appears.
value for Interval UPM generation every _____ minutes, or accept the default of
1440 minutes, which equals one day.
This interval specifies how often User Performance Measurement files are
generated.
default of 15 minutes.
This interval specifies how often Equipment Performance Measurement files are
generated.
measurement to start each day.
measurement to stop each day.
days of the week you want performance counter retrieval to occur.
want the performance data stored on the hard disk.
Comments? infodev@avaya.com
G.729 daughterboard and DAP wall
October 2012
Advertisement
Table of Contents
