Table of Contents
Advertisement
System configuration
Important:
Configuring SIP DECT systems used for MSMN ensure that you use the same SARI on all
of them. For more information, see
Call Server Configuration
MSDN configuration requirements:
1. Uniform (UDP) or coordinated (CDP) numbering plan must be configured on all
2. All sites must be connected through trunks; Private Network Identifier (PNI) must
3. SPRE and FFC must be enabled; Remote call forward (FFC RCFA, RCFD, RCFV)
Subscribing DECT handsets and UEXT configuration on the home
site
You must subscribe your DECT handset for MSMN configuration, using your DAP Manager.
Important:
A DECT handset for MSMN must be subscribed using Enable for Multi-site option in DAP
Manager. For more information, see
As for usual SIP DECT set you must also configure a UEXT block on call server.
Important:
When you configure a UEXT block for an MSMN DECT set, enable Call Forward All Calls
to external DN Allowed feature (CLS CFXA).
Importing and exporting subscriptions
Use the procedures in this section to export subscriptions from the home site and import
subscriptions on remote sites.
Exporting subscriptions in a file
1. In the navigation menu, click Pack Up & Go.
2. SelectExport (multi-site) from the menu.
3. Move the required subscriptions from the Selection list to the Export list, using the
114
SIP DECT Fundamentals
sites.
be the same for all systems.
must be configured.
buttons > (for one selected subscription) or >> (for all subscriptions).
Comments? infodev@avaya.com
Configuring DECT Settings
Subscribing a DECT handset
on page 99.
on page 104.
October 2012
Advertisement
Table of Contents
