Table of Contents
Advertisement
Location builder tool
3. Go to File and then New Location. Give the location a name and add information when needed.
4. Set the Drawing Surface Size correct. By default 1 meter = 100 pixels.
(However, you can change this relation via Tools > Options, when the dialogue window is closed).
When done, Click OK.
5. Let the location Area fit to your screen to get an overview.
6. Go to Building and then select Add
.
7. The following window is displayed.
184
SIP DECT Fundamentals
October 2012
Comments? infodev@avaya.com
Advertisement
Table of Contents
