Avaya CS 1000 Fundamentals page 185

8. Enter the Building parameters and click OK. Please note that this building is just a "label". You won't
see it in the location area. The actual building will be the ground floor picture.
9. Click Building view in the right left corner of the screen. See screen capture below.
10. The following screen is displayed.
11. Click the black triangle right to the Floor button and select Add .
12. The following window is displayed. Enter the floor number. The ground floor should be level 0. Write
useful information in the Information window.
SIP DECT Fundamentals October 2012 185